Commercial Refrigerator, 2-door, 2/1 Model GN 1410

- Material: (housing) stainless steel AISI 430, (interior) stainless steel AISI 304
- 2 doors, self-closing, lockable, with practical magnetic seal
- 6 adjustable shelves: W 530 x D 650 mm, load capacity per shelf: 25 kg
- Shelf adjustment: Up to 80 mm spacing possible
- Various shelf insertion options through notches in the side wall
- 2 bottom shelves (W 538 x D 630 mm) for optimal, energy-reducing air circulation
- 4 height adjustable feet
- Digital temperature control (DIXELL)
- Insulation: 90 mm
- Circulating air cooling with highly efficient fan and optimal air guidance
- Automatic fan shutdown system when door is opened
- Automatic defrosting and automatic evaporation of condensation water
- Suitable for climate class 4, 5
- Temperature range: -2 / +8 °C
- Connection: 220 V - 1 Ph. - 50 Hz - 0.13 kW
- Shelves: 3x W 530 x D 650 mm + for bottom: W 510 x D 605 mm
- Capacity (gross/net): 1300 / 940 liters
- interior dimensions: W 1240 x D 700 x H 1501 mm
- Exterior dimensions: W 1420 x D 875 x H 2090 mm
- Weight (net/gross): 180 / 210 kg
- Refrigerant: R600a
- Energy efficiency class: A (spectrum A+++ to G) with climate class
-> high-performance device!

Safety and Warning Instructions

- Place the device exclusively on a stable, level surface.
- Ensure that the mains voltage matches the specifications on the rating plate.
- Children and unauthorized persons must not operate or misuse the device.
- Never clean the device with a water jet to avoid the risk of short circuits.
- After transporting the device, it must remain upright for at least 24 hours before being switched on to prevent damage to the refrigerant circuit.
- Do not operate the device near heat sources, direct sunlight, or in damp environments.
- Maintain a minimum distance of 10 cm from the back wall and 30 cm from the top for proper ventilation.
- The ventilation area must always be free of dust and obstructions to ensure optimal cooling performance.
- The refrigerant is flammable – avoid damage to the cooling circuit. In case of a leak, ventilate the room thoroughly and avoid open flames or sparks.
- If visible damage or malfunctions occur, immediately stop operation and contact the authorized dealer.
- Before cleaning, maintenance, or extended periods of non-use, unplug the device and fully defrost it.
- Regularly clean the condenser slots to remove dust buildup and maintain efficiency.
- Repairs and maintenance must only be performed by qualified personnel.