Refrigerator with 2 drawers, Model DRAW 3SK

- Material: (housing, work surface, interior) stainless steel AISI 304, (Control panel) black lacquered steel
- 2 drawers with practical magnetic sealing
- Digital temperature control (DIXELL)
- Insulation: 50 mm
- Static cooling with fan
- Automatic defrosting and automatic evaporation of condensate
- Suitable for climate class 4, 5
- Temperature range: +1 / +4 °C
- Connection: 220 V / 1 Ph. / 50 Hz / 0.460 kW
- Capacity (gross/net): 265 / 166 L
- Internal dimensions (drawers): 2 x W 958 x D 545 mm
- Internal dimensions (unit): W 1000 x D 565 x H 470 mm
- External dimensions: W 1230 x D 700 x H 865 mm
- 4 wheels, 2 lockable
- Weight (net/gross): 113 / 125 kg
- Refrigerant: R290
- Energy efficiency class: B (spectrum A+++ to G) with climate class 5
-> high-performance device!

Safety and Warning Instructions

- Place the device exclusively on a stable, level surface.
- Ensure that the mains voltage matches the specifications on the rating plate.
- Children and unauthorized persons must not operate or misuse the device.
- Never clean the device with a water jet to avoid the risk of short circuits.
- After transporting the device, it must remain upright for at least 24 hours before being switched on to prevent damage to the refrigerant circuit.
- Do not operate the device near heat sources, direct sunlight, or in damp environments.
- Maintain a minimum distance of 10 cm from the back wall and 30 cm from the top for proper ventilation.
- The ventilation area must always be free of dust and obstructions to ensure optimal cooling performance.
- The refrigerant is flammable – avoid damage to the cooling circuit. In case of a leak, ventilate the room thoroughly and avoid open flames or sparks.
- If visible damage or malfunctions occur, immediately stop operation and contact the authorized dealer.
- Before cleaning, maintenance, or extended periods of non-use, unplug the device and fully defrost it.
- Regularly clean the condenser slots to remove dust buildup and maintain efficiency.
- Repairs and maintenance must only be performed by qualified personnel.