Commercial Freezer - Model 2/1 GN 1410 BT PRO

- Material: (housing and interior) stainless steel
- Shelves: 6 shelves W 530 x D 650 mm, adjustable in height,
2 bottom shelves W 538 x D 630 mm
- Self-closing doors, lockable
- Embossed side walls for easy cleaning, 15 levels
- High-efficiency compressor, for energy saving
- interior with rounded edges, for easy cleaning
- Digital temperature control (DIXELL)
- Insulation: 90 mm
- Cooling type: Forced air cooling
- Automatic defrosting
- Suitable for climate class: to 5
- Temperature range: -18 / -22 °C
- 4 feet, H 110-170 mm
- Connection: 220V - 50Hz - 0.27 kW
- Capacity (gross/net): 1300 / 940 L
- Internal dimensions: W 1240 x D 700 x H 1501 mm
- External dimensions: W 1420 x D 875 x H 2090 mm
- Weight (net/gross): 195 / 225 kg
- Refrigerant R290
- Energy efficiency class: B (Range from A+++ to G) with climate class 5
-> high-performance device!

Safety and Warning Instructions

- Place the device exclusively on a stable, level surface.
- Ensure that the mains voltage matches the specifications on the rating plate.
- Children and unauthorized persons must not operate or misuse the device.
- Never clean the device with a water jet to avoid the risk of short circuits.
- After transporting the device, it must remain upright for at least 24 hours before being switched on to prevent damage to the refrigerant circuit.
- Do not operate the device near heat sources, direct sunlight, or in damp environments.
- Maintain a minimum distance of 10 cm from the back wall and 30 cm from the top for proper ventilation.
- The ventilation area must always be free of dust and obstructions to ensure optimal cooling performance.
- The refrigerant is flammable – avoid damage to the cooling circuit. In case of a leak, ventilate the room thoroughly and avoid open flames or sparks.
- If visible damage or malfunctions occur, immediately stop operation and contact the authorized dealer.
- Before cleaning, maintenance, or extended periods of non-use, unplug the device and fully defrost it.
- Regularly clean the condenser slots to remove dust buildup and maintain efficiency.
- Repairs and maintenance must only be performed by qualified personnel.