System shelf 1000x600x1800 mm

- Material: stainless steel 1.4301
- Made in Germany
- Shelf stand made of 25 x 25 x 1.2 mm square tube, cross braces made of folded flat profile 52 x 2 mm.
- Firmly welded bolts 0.7 mm, spacing 150 mm to support the shelves.
- Sealing of the shelf uprights with screw feet with height adjustment on the lower tube ends and plastic plugs on the upper tube ends.
- Perforated shelves from 600 -1000 mm length with 0.8 mm, from 1200 mm length with 1.0 mm sheet thickness.
- Staggered rows of holes, burr-free countersunk long holes 40 x 15 mm
- All shelves bevelled 50 mm on the long side and 43 mm on the front and folded inwards without burrs.
- Flat steel diagonal struts 25 x 2 mm / including cap nuts for attachment.
- Corner attachment possible with corner connection clamps made of stainless steel.
- With corner mounting, the shelf load of the load-bearing shelves is reduced to 70% of the values given below.
- Dim.: W 1000 x D 600 x H 1800 mm
- Weight: 29 kg

Safety and Warning Instructions

- Safely dispose of packaging materials to prevent the risk of suffocation.
- Ensure the shelf board is properly mounted in the designated slot system to guarantee stability.
- Adhere to load limits to prevent damage or instability.
- Regularly inspect for damage and replace if visible defects are present.
- Keep children and unauthorized persons away from the shelf and its boards to avoid misuse.
- Do not continue using the shelf board if visible damage or instability is detected; replace it immediately.